< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=946635431216384&ev=PageView&noscript=1" />

‹

China factory ASME SA179 SA192 Heat Exchanger Boiler Tube Seamless Steel Tube

›

‹

›

China factory ASME SA179 SA192 Heat Exchanger Boiler Tube Seamless Steel Tube
Boiler tube is a type of seamless tube. The manufacturing method is the same as that of seamless pipes, but there are strict requirements on the steel grades used to manufacture steel pipes. According to the temperature of use, it is divided into two types: general boiler tubes and high-pressure boiler tubes.
+86 15764178314
8615764178314
admin@txdmetal.com

Address:Room 111, Dongfang Xingye Steel Market, No. 121 Daqiao Road, Licheng District, Jinan City, Shandong Province, China

Payment Term:T/T, L/C, Western Union, etc
Design Style:customizable
Delivery Time:7 Days
Transportation:By sea or Land transportation

contact us

PRODUCT PARAMETERS


Boiler tube is a type of seamless tube. The manufacturing method is the same as that of seamless pipes, but there are strict requirements on the steel grades used to manufacture steel pipes. According to the temperature of use, it is divided into two types: general boiler tubes and high-pressure boiler tubes. The mechanical properties of boiler tubes are an important indicator to ensure the final performance (mechanical properties) of steel, which depends on the chemical composition and heat treatment system of the steel. In the steel pipe standard, according to different use requirements, the tensile properties (tensile strength,yield strength or yield point, elongation), hardness and toughness indicators, as well as high and low temperature properties required by users are specified.


① Generally, the temperature of boiler tubes is below 350℃, and domestic tubes are mainly made of No. 10 and No. 20 carbon steel hot-rolled tubes orcold-drawn tubes. boiler tube boiler tube.
② High-pressure boiler tubes are often used in high temperature and high pressure conditions, and the tubes will beoxidized and corroded under the action of high-temperature flue gas and water vapor. The steel pipe is required to have high lasting strength, high oxidation corrosion resistance, and good organizational stability.



Product NameBoiler Tube
Wall Thickness1.5mm-100mm
Length3m-12m
Outer diameter22mm-650mm
ToleranceWall Thickness:±0.05MM Length:±6mm Outer Diameter:±0.3MM
MaterialQ195-Q345, 10# ,20#,45#,Gr.B-Gr.50, S235JR, SS400, SPHC,16mn, 40cr, 20cr, 42crmo4, 15crmo, 4140, 4130, API5L , ASTM A106 Gr.B, ASTM A53 Gr.B, ST37,ST35,St42,St45,St52, 1010-1050
StandardASTM, DIN, JIS, BS, AISI, GB
Package1. Packed with 8 bundles tightened with metal belt and plastic wrapped if need
2. According to customer's requirement
ApplicationWidely used in furniture,interior decoration, fluid pipeline, petroleum and natural gas industry, drilling, pipeline, structure
Advantages1.Reasonable price with excellent quality2.Abundant stock and prompt delivery3.Rich supply and export experience, sincere service4.Reliable forwarder

                   

GB3087-2008"Seamless Steel Tubes for Low and Medium Pressure Boilers". There are 43 types of steel pipes for various structural boilers, with an outer diameter of 10 to 426 mm. There are a total of 29 types of wall thicknesses from 1.5 to 26 mm. However, the outer diameter and wall thickness of superheated steam pipes, large smoke pipes, small smoke pipes and arch brick pipes for locomotive boilers are otherwise specified.
GB5310-2008 "Seamless Steel Tubes for High-Pressure Boilers" has an outer diameter of 22-530mm and a wall thickness ranging from 20-70mm. Cold-drawn (cold-rolled) tubes have an outer diameter of 10 to 108 mm and a wall thickness of 2.0 to 13.0 mm.



Boiler Tube Quality Standard

—

ASTM A106 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

ASTM A179 Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

ASTM A192 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

ASTM A209 Standard Specification for Seamless Carbon Molybdenum Alloy-Steel Boiler and Super -heater Tubes

ASTM A210 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

ASTM A213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

ASTM A333 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

ASTM A335 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

DIN 17175 Seamless tubes of heat-resistance steels

EN10216-2 Seamless steel tubes for pressure purpose

JIS G3456 Carbon steel pipes for high temperature service

JIS G3461 Carbon steel pipes for boiler and heat exchanger service

JIS G3462 Alloy steel boiler and heat exchanger tubes



Packing and Shipping

—

1) Standard export package,suit for all kinds of transport,or as required.

2) All standard steel products are stocked, timely shipping as per clients request.



China factory ASME SA179 SA192 Heat Exchanger Boiler Tube Seamless Steel Tube


Product Description

   
Product NameBoiler Tube
Wall Thickness1.5mm-100mm
Length3m-12m
Outer diameter22mm-650mm
ToleranceWall Thickness:±0.05MM Length:±6mm Outer Diameter:±0.3MM
MaterialQ195-Q345, 10# ,20#,45#,Gr.B-Gr.50, S235JR, SS400, SPHC,16mn, 40cr, 20cr, 42crmo4, 15crmo, 4140, 4130, API5L , ASTM A106 Gr.B, ASTM A53 Gr.B, ST37,ST35,St42,St45,St52, 1010-1050
StandardASTM, DIN, JIS, BS, AISI, GB
Package1. Packed with 8 bundles tightened with metal belt and plastic wrapped if need
2. According to customer's requirement
ApplicationWidely used in furniture,interior decoration, fluid pipeline, petroleum and natural gas industry, drilling, pipeline, structure
Advantages1.Reasonable price with excellent quality2.Abundant stock and prompt delivery3.Rich supply and export experience, sincere service4.Reliable forwarder
                   

China factory ASME SA179 SA192 Heat Exchanger Boiler Tube Seamless Steel Tube


Classification of Boiler tubes

Boiler tube is a type of seamless tube. The manufacturing method is the same as that of seamless pipes, but there are strict requirements on the steel grades 
used to manufacture steel pipes. According to the temperature of use, it is divided into two types: general boiler tubes and high-pressure boiler tubes. The
mechanical properties of boiler tubes are an important indicator to ensure the final performance (mechanical properties) of steel, which depends on the chemical
composition and heat treatment system of the steel. In the steel pipe standard, according to different use requirements, the tensile properties (tensile strength,
yield strength or yield point, elongation), hardness and toughness indicators, as well as high and low temperature properties required by users are specified.

① Generally, the temperature of boiler tubes is below 350℃, and domestic tubes are mainly made of No. 10 and No. 20 carbon steel hot-rolled tubes or
cold-drawn tubes. boiler tube boiler tube.
② High-pressure boiler tubes are often used in high temperature and high pressure conditions, and the tubes will be
oxidized and corroded under the action of high-temperature flue gas and water vapor. The steel pipe is required to have high lasting strength, high oxidation
corrosion resistance, and good organizational stability.

GB3087-2008"Seamless Steel Tubes for Low and Medium Pressure Boilers". There are 43 types of steel pipes for various structural boilers, with an outer diameter of 10 to 426 mm. There are a total of 29 types of wall thicknesses from 1.5 to 26 mm. However, the outer diameter and wall thickness of superheated steam pipes, large smoke pipes, small smoke pipes and arch brick pipes for locomotive boilers are otherwise specified.
GB5310-2008 "Seamless Steel Tubes for High-Pressure Boilers" has an outer diameter of 22-530mm and a wall thickness ranging from 20-70mm. Cold-drawn (cold-rolled) tubes have an outer diameter of 10 to 108 mm and a wall thickness of 2.0 to 13.0 mm.

The provisions of GB3087-2008 "Seamless Steel Tubes for Low and Medium Pressure Boilers" and GB5310-95 "Seamless Steel Tubes for High Pressure Boilers". 

Appearance quality: There are no cracks, folds, folds, scars, delaminations and hair lines on the inner and outer surfaces of the steel pipe. These defects should 

be completely removed. The cleaning depth shall not exceed the negative deviation of the nominal wall thickness, and the actual wall thickness at the cleaning

place shall not be less than the minimum allowable wall thickness.


Boiler Tube Quality Standard:

ASTM A106 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

ASTM A179 Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

ASTM A192 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

ASTM A209 Standard Specification for Seamless Carbon Molybdenum Alloy-Steel Boiler and Super -heater Tubes

ASTM A210 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

ASTM A213 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

ASTM A333 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

ASTM A335 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

DIN 17175 Seamless tubes of heat-resistance steels

EN10216-2 Seamless steel tubes for pressure purpose

JIS G3456 Carbon steel pipes for high temperature service

JIS G3461 Carbon steel pipes for boiler and heat exchanger service

JIS G3462 Alloy steel boiler and heat exchanger tubes

Product details

China factory ASME SA179 SA192 Heat Exchanger Boiler Tube Seamless Steel Tube

Application

China factory ASME SA179 SA192 Heat Exchanger Boiler Tube Seamless Steel Tube

①General boiler tubes are mainly used to manufacture water wall tubes, boiling water tubes, superheated steam tubes, superheated steam tubes for locomotive

 boilers, large and small smoke tubes and arch brick tubes, etc.

②High-pressure boiler tubes are mainly used to manufacture superheater tubes, reheater tubes, gas guide tubes, main steam tubes, etc. of high-pressure and

ultra-high-pressure boilers. The supply and demand trend of the high-pressure boiler tube industry is generally stable, but the supply and demand situation of 

each specific sub-industry will be further differentiated. Industry insiders pointed out that the most critical link is the use and promotion of new energy-saving

thermal insulation 20g high-pressure boiler tube equipment.

New energy-saving 20g high-pressure boiler tube products are gradually increasing in the market, such as green environmental protection coatings, energy-saving

and water-saving bathroom products, environmental protection stone, environmental protection external cement foam insulation board, etc. Energy-saving and 

environmental protection products have a broad market in the 20g high-pressure boiler tube industry Medium prospects are promising

About us

China factory ASME SA179 SA192 Heat Exchanger Boiler Tube Seamless Steel Tube

SHANDONG JHT Steel Co., LTD is a professional factory that produces hot -dip galvanized steel pipes and welded steel pipes.

The factory has five production lines of a longitudinal cutting unit, five high-frequency straight welding pipe machines (φ21.3-φ219), two hot-dip galvanized units, 

cold-rolled production lines, with an annual output of more than 120,000 tons.

In the past ten years, the factory adheres to the principle of "quality first, user first", strictly organizes production in accordance with national standards, and can

also produce British BS standards according to customer requirements. The American ASTM standard steel pipe and various non -standard steel pipes. Gorgeous.

Products are widely used to transport water, gas, compressed air, oil heating, and exploration, fire, chemical equipment, container manufacturing, vehicle manufacturing, 

transformer manufacturing, etc.

certificate

China factory ASME SA179 SA192 Heat Exchanger Boiler Tube Seamless Steel Tube

FAQ

Q:Can I get samples before order ?

A:Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.

 

Q:Can I go to your factory to visit?
A:Of course, we welcome customers from all over the world to visit our factory.

 

Q:How can I get a quotation from you ?

A:You can leave us message, and we will reply every message in time. Or we may talk on line.

 

Q:What product information do I need to provide?

A:You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.

 

Q:Does the product have quality inspection before loading?
A:Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.we accept the third party inspection 

absolutely.

 

Q:How do we trust your company?
We specialise in steel business for years as golden supplier on Alibaba, headquarter locates in Jinan, Shandong province, you are welcome to investigate in any 

ways, by all means, you could place an order in Alibaba with trade assurance which could secure your payment.

CUSTOMER EVALUATION

SHANDONG TXD Steel Group Co.,Ltd 

Shandong TXD Steel Group Co.,Ltd founded in 2003 and we located in Shandong Province. Our company has 12 departments in Shandong, Suzhou and Guangzhou totally. There are more than 4000 employees here in our company. Our main products include hot rolled coils, cold-rolled coils, GI, PPGI, AFP 55% Al galvalume coil, stainless steel. We also export structural beams, steel pipes, aluminiun and cooper pipes etc. Our company's annual sales amount is around 100 million US dollars, we also entered into strategic partnership with Bao steel, Laiwu steel, Rizhao steel, Anfeng steel, HBIS etc. Our company has achieved ISO9001 quality certification system. Our main market is middle east, Southeast Asia, Africa, South America etc. Hope to start the good cooperations with friends all over the world!

FAQ

1. Q:Are you a factory or trading company?
    A:We are a factory.we also have cooperated factory doing other steel business.
2. Q:Where is your company located? How can I visit there?
    A:Our company is located in Jinan City, China,.All our clients from home or abroad are warmly welcome to visit us!
3. Q:Can I get some samples?
    A:Yes,we are honored to offer you samples.
4. Q:How does your factory do regarding quality control?
    A:Quality is priority. Our factory has gained BV, SGS authentication. We guarantee the goods out from our factory 100% qualified.And Each Process, we have very strict operation and arrange 2 techinians to inspect. After the products are finished,we will make the last test to pick up the unqualified products.
5. Q: How long does your warranty?
    A:We can assured the quality within 90 days after your receiving the cargoes.
6. Q:What is your MOQ?
    A:As long as hold one container ,we can accpet the order.
7.Q: What is your payment ? 
    A:If the quantity more than 100 tons , 100% l/c at sight can be accpeted. Less than 100 tons ,30% t/t in advance ,70% balance agianst with B/L copy.

CONTACT US

Telephone Number

+86 15764178314

WhatsApp

8615764178314

          Get in touch with us for product quotation, or ask me for detailed product information. We have formal qualifications and superior prices, you are welcome to write to contact us at any time, we will be the most enthusiastic service to receive you, welcome to your letter!

          You can also learn more about our company through the link below:

submit
TOP

RECOMMENDED